robwlakes / Weather-Station-OS-Sensors
Weather Sensors, Tx & Rx for Arduino plus 433MHz
☆17Updated 4 years ago
Alternatives and similar repositories for Weather-Station-OS-Sensors:
Users that are interested in Weather-Station-OS-Sensors are comparing it to the libraries listed below
- Source and examples for talking to the MOD-1016 AS3935 lightning sensor module☆13Updated 8 years ago
- 433MHz to MQTT Gateway using RFlink, Arduino Mega, and ESP8266☆46Updated 5 years ago
- AS3935 Franklin Lightning Sensor™ IC by AMS Arduino library☆46Updated 10 years ago
- Multichannel display reading from Thingspeak.com visualizing using Highcharts.☆24Updated last year
- ☆24Updated 8 years ago
- Anémomètre et girouette connecté à base d'ESP8266☆21Updated 8 years ago
- [OUTDATET] Arduino code sample to configure the ESP8266 via http and update Over-the-Air (OTA)☆20Updated 9 years ago
- Easy MultiSensor device based on ESP8266 using MySensors library☆22Updated 9 years ago
- A LoRa shield for WeMos D1 mini boards☆27Updated 7 years ago
- Various Nodes and Helpers for Homie☆20Updated 5 years ago
- Arduino/ESP8266 based sprinkler Controller☆31Updated 4 years ago
- RFM69 gateway and controller for ESP8266☆45Updated 8 years ago
- Simple Hue remote based on the Sparkfun ESP8266 created in Arduino IDE☆20Updated 9 years ago
- Terminal Shield for the WeMos D1 Mini with ESP8266☆20Updated 7 years ago
- See Melvanimate: not maintained now.☆22Updated 9 years ago
- WeMos RFM69 RF Gateway + IC2 Oled + ATSHA204☆24Updated 7 years ago
- TM1640 Scroll Wemos 8x8 Led Matrix Display Shield☆14Updated 6 years ago
- Useful libraries for Arduino☆31Updated last year
- Local Sensors☆79Updated 7 years ago
- Full-featured Serial bridge for ESP8266, supports MQTT, WebSockets,Telnet, and also comes with a nice Config Page☆39Updated 2 years ago
- ninHOME Node - Web Configurable Modular ESP8266 Firmware☆26Updated 3 years ago
- ESP8266 Gateway supporting all Spreading Factors☆18Updated 7 years ago
- Arduino based 433MHz Tx and Rx combo using Manchester protocol☆31Updated 10 years ago
- ☆16Updated 6 years ago
- Code to monitor the power consumption of embedded devices☆18Updated 7 years ago
- Fritzing Part: WeMos D1 Mini☆80Updated 7 years ago
- Arduino-based Dust Sensor that updates PM 2.5 and PM 10 concentration readings to ThingSpeak☆13Updated 9 years ago
- Melvanimate☆60Updated 7 years ago
- Readme/Diagram for the "Kube" NodeMCU/DHT22 based MQTT temp/humidity home automation multi-sensor with local OLED display)☆40Updated 5 years ago
- ESP8266 port of Opensprikler software.☆37Updated 7 years ago