per1234 / zzInoVIDPIDLinks
VID/PID definitions for all common USB to serial chips for the Arduino IDE. Used to identify ports listed on the Tools > Port menu.
☆16Updated 6 years ago
Alternatives and similar repositories for zzInoVIDPID
Users that are interested in zzInoVIDPID are comparing it to the libraries listed below
Sorting:
- Adafruit TFT library using 8 bit parallel access ported to STM32☆52Updated 5 years ago
- OSC Calibrator and High-Voltage Fuse Resetter for 8-Pin ATtinys☆57Updated 2 years ago
- DIY UPDI programmer with open source hardware!☆74Updated 10 months ago
- required (and optional) source files for the Arduino development environment, specifically the hardware/arduino sub-directory, to support…☆19Updated 3 years ago
- Arduino library driver for Adafruit's I2C-Based FRAM Breakouts☆46Updated last year
- usbasp improved firmware☆57Updated 4 years ago
- Minimal bit-bang send serial 38400/115200 baud for 1MHz or 115200/230400 baud for 8 or 16MHz ATtiny clock☆65Updated 11 months ago
- Tiny Arduino (and related) hacks not worth of their own repository.☆19Updated last year
- A fast Arduino IDE compatible graphics and fonts library including a driver for the ILI9341 based TFT displays.☆118Updated 3 years ago
- small, fast, and precise bit-bang UART for 8-bit AVR MCUs☆69Updated 4 years ago
- Arduino core for flashing mEDBG firmware onto the microUPDI programmer☆20Updated 10 months ago
- ATtiny I2C Slave Library☆50Updated 4 years ago
- UPDI programmer software for Arduino (targets ATtiny 417 / 814 / 816 / 817 / 1614 / 1616 / 1617 and similar MCUs)☆76Updated 3 years ago
- This is a fork from arduino/ArduinoCore-samd on GitHub. This will be used to maintain Arduino support for SAM D|L|C (M0+ and M4F) boards …☆108Updated last year
- Arduino library for INA219 voltage, current and power sensor☆27Updated 6 months ago
- Arduino library for I2C FRAM☆42Updated 3 months ago
- There are two 'versions' of the LCD library - one is straightup avr-gcc and the other is an Arduino Library. They're essentially the same…☆108Updated last year
- ATtiny High-voltage Serial Programmer with Chip Erase function☆19Updated 4 years ago
- Arduino graphics library for ST7735 displays with propotional fonts☆92Updated 2 years ago
- port of free-DAP to standalone arduino☆79Updated 9 months ago
- Arduino library for MCP23S17 IO Expanders☆45Updated 4 years ago
- Implementation of simple graphic user interface using cheap encoder and color LCD☆16Updated 4 years ago
- This library enables you to use Interrupt from Hardware Timers on supported Arduino boards such as AVR, ESP8266, ESP32, SAMD, SAM DUE, nR…☆38Updated 2 years ago
- High-Voltage Serial Programmer and Fuse Resetter☆31Updated 2 years ago
- Arbitrary waves can be drawn, edited, saved, opened and uploaded to the Due via USB, or the Due can run alone, controlled by pots & switc…☆11Updated 3 months ago
- AVR Fuse Rescue Shield based on high voltage programmer by Jeff Keyzer aka MightyOhm.☆17Updated 2 years ago
- Codes and libraries support development on STM8 Microcontrollers using COSIC C compiler. Supporting Repo for tutorials on circuitdigest.c…☆37Updated 2 years ago
- My repo for experimenting with the usbasp firmware from www.fischl.de☆36Updated 8 years ago
- USBasp for ATtiny85☆33Updated 3 years ago
- make arduino board to be LGT8FX8D/P programmer☆69Updated 3 years ago