mweir / Embedded-PN532Links
This is an open source NFC stack for the arduino microcontroller that allow peer-to-peer communication between the embedded platform and an Android NFC enabled device. The library implements the Ndef Push Protocol (NPP) and has been tested with an Android NFC-enabled running Android 2.3.3.
☆19Updated 6 years ago
Alternatives and similar repositories for Embedded-PN532
Users that are interested in Embedded-PN532 are comparing it to the libraries listed below
Sorting:
- PN532 library using NFC Shield from Seeed Studio to exchange NDEF message with Android☆29Updated 11 years ago
- Wio Tracker LTE is boards combined with STM32F405RGT6 and EC21(4G/3G/GPS) module☆24Updated 7 months ago
- Read more about this at☆20Updated 11 years ago
- Moved to https://github.com/redbear/nRF5x☆18Updated 8 years ago
- Simple but slow keeloq implementation☆23Updated 11 years ago
- ESP8266 lwIP library with NAT, SLIP, ENC28j60 Ethernet, and routing support☆70Updated 5 years ago
- Linux RTL8710AF below the GCC version, you can Ubuntu, CentOS, Fedora and so on the development of the SDK environment, support the compi…☆37Updated 5 years ago
- SDK for the Nordic nRF24LE1 for use with SDCC☆36Updated last year
- IOT-Espressif-Android released APKs☆58Updated 8 years ago
- Broadcom WICED patches for MXCHIP EMW wireless ARM platform. Not affiliated with MXCHIP or Broadcom☆55Updated 5 years ago
- Library for Crypto I2C Devices☆24Updated 7 years ago
- Library/Driver for NXP PN7150 NFC device☆25Updated 7 months ago
- WIFI and BT handover demo application based on Linux libnfc-nci stack☆10Updated 9 years ago
- ☆14Updated 8 years ago
- W5500-EVB Library and Examples☆77Updated 8 months ago
- Examples of programming nRF52832 + MPU9250 + BMP280 dev board from https://www.tindie.com/products/onehorse/nrf52832-development-board/☆33Updated 7 years ago
- WICED SDK Releases from Broadcom☆32Updated 10 years ago
- nRF51 UART examples☆63Updated 7 years ago
- Simple reader sketch for Arduino IDE for ESP8266 (can be ported)☆15Updated 6 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- This is a smartconfig demo code on esp8266. Just enjoy yourself!!!☆72Updated 9 years ago
- Repository for ATSHA204 Example code and design files☆38Updated 10 years ago
- ☆11Updated 9 years ago
- Bootloader for STM32F0 using STM32F072RB Discovery board, with CubeMX design files for both bootloader and application.☆17Updated 8 years ago
- Non DMA version of the spi_master driver with ILI9431&ILI9488 example☆36Updated 8 years ago
- This is a demo program. STM32F1 development board (OPEN103Z-B) monitors current and voltage ratings through INA219 IC and displays it on …☆12Updated 9 years ago
- CAN-BUS TO USB-UART(STM32F042)☆23Updated 9 years ago
- Add-on for RedBear boards to work with Broadcom's WICED SDK☆17Updated 7 years ago
- Prepare FAT image on host and flash to ESP32.☆45Updated 2 years ago
- WIZnet Serial to Ethernet(S2E) module based on W7500 chip, WIZ107/108SR S2E compatible device☆19Updated 5 months ago