Alternatives and similar repositories for bin-packing

Users that are interested in bin-packing are comparing it to the libraries listed below

• tmtsoftware / ethercat-demo
  ☆12Updated 8 years ago
• cnc-club / linuxcnc
  LinuxCNC S-curve
  ☆18Updated 12 years ago
• xcoder123 / SvgToGcode
  Takes SVG and converts the elements in gcode instructions.
  ☆25Updated 10 years ago
• PymZoR / S-curve-Planner
  C Library for planning n-th order S-curve motion profiles
  ☆58Updated 8 years ago
• muhlbaier / embedded-software
  Embedded Software Design Reusable Code
  ☆15Updated 2 years ago
• skiars / PID_Simulator
  A PID Control Simulator build with Qt.
  ☆21Updated 7 years ago
• fra589 / grbl_post
  FreeCAD Path post processor for Grbl with drilling cycles (G81, G82 & G83) conversions to G0/G1 moves.
  ☆10Updated 3 years ago
• koppi / mk
  My LinuxCNC / EtherCAT notes
  ☆60Updated 3 months ago
• i5cnc / plcopen
  plcopen
  ☆55Updated 5 years ago
• nucleron / beremiz
  ☆67Updated 3 years ago
• andreili / STM32-PLC
  The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
  ☆63Updated 7 years ago
• icshwi / etherlabmaster
  IgH EtherCAT Master Building and Configuration Environment
  ☆77Updated 5 years ago
• Yaskawa-Global / SmartPendantSDK
  Software Development Kit (SDK) for Smart Pendant Extensions
  ☆17Updated last month
• sittner / linuxcnc-ethercat
  LinuxCNC EtherCAT HAL driver
  ☆237Updated last year
• suda-morris / FreeECAT
  EtherCAT Slave(XMC4800) and Master(IgH), Open source both in hardware and software
  ☆57Updated 7 years ago
• BetzDrive / bldc-controller
  Motor controller firmware!
  ☆42Updated 4 months ago
• XiaojiaoChen / F7_Ethercat_RTOS
  STM32-FreeRTOS-Ethercat realtime platform
  ☆71Updated 6 years ago
• VojislavM / UART_TLV
  TLV protocol on STM32 via UART
  ☆11Updated 9 years ago
• nucleron / RTE
  ☆57Updated 6 years ago
• QGCoder / qgcoder
  An interactive G-code editing GUI.
  ☆20Updated 4 months ago
• grotius-cnc / hal-core
  cnc and robot realtime controller. runs on a hal kernel module.
  ☆49Updated 3 years ago
• tinkersprojects / Delta-Kinematics-Library
  Arduino Forward and Inverse Kinematics Library for Delta robot
  ☆47Updated last year
• dillonhuff / gpr
  A simple C++ G-code parser
  ☆92Updated 2 years ago
• yuqlid / EtherCAT_board
  EtherCAT slave board uisng LAN9252
  ☆15Updated 8 years ago
• tinkercnc / spi-fpga-driver
  LinuxCNC to fpga-over-spi driver
  ☆25Updated 9 years ago
• ningfei / ethercat
  IgH EtherCAT Master for Linux
  ☆80Updated 10 years ago
• ART-robot / ethercat_install
  ethercat install
  ☆47Updated 8 years ago
• ethercat-diy / arducat
  EtherCAT over arduino (atmega1280)
  ☆54Updated 7 years ago
• pkoprov / Haas-Data-Collection
  The project on collection of the data from Haas CNC machines
  ☆16Updated last year
• grotius-cnc / skynet_robot_control_rtos_ethercat
  Realtime 6-axis robot controller, based on Qt C++ & OpenCascade & KDL kinematics & HAL
  ☆103Updated 3 years ago