microchip-pic-avr-examples / atmega4809-getting-started-with-usart-studio
This repository contains 5 bare metal code examples that show how to use the USART peripheral of the ATmega4809 device in different modes. It's a companion to the TB3216-Getting Started with Universal Synchronous/Asynchronous Receiver/Transmitter (USART)
☆13Updated 3 years ago
Alternatives and similar repositories for atmega4809-getting-started-with-usart-studio:
Users that are interested in atmega4809-getting-started-with-usart-studio are comparing it to the libraries listed below
- Generate Pinout Datasheet in SVG format, from a CSV source file of pin defintions☆62Updated 2 years ago
- Arduino core for WCH CH32V RISC-V devices.☆29Updated last year
- Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 and STM3…☆39Updated 2 months ago
- ☆34Updated last month
- STM32H7B0VBT6 Core Board 280Mhz,128KB ROM,1.4M SRAM☆16Updated 2 years ago
- ☆21Updated 7 months ago
- A pio program to capture signal edges on any pins of the RP2040☆14Updated 6 months ago
- Calibration of the internal RC oscillator of atmega328p chip, and UART bootloader(ATmegaBOOT) without crystal.☆20Updated 10 months ago
- network connected ws2812 led-controller on a stm32f103 processor.☆31Updated 9 years ago
- Resources for MightyWatt R3 electronic load☆31Updated last year
- ☆36Updated 5 years ago
- ☆24Updated last year
- lightweight CMSIS-DAP implementation☆17Updated 5 years ago
- Adafruit TFT library using 8 bit parallel access ported to STM32☆49Updated 5 years ago
- WeAct_HID_Bootloader_F4x1 base on STM32_HID_Bootloader☆42Updated 5 years ago
- External flash component for the ESP32☆28Updated 7 years ago
- ESP8266 application for flashing STM8S via stm8-bootloader☆28Updated 7 years ago
- "Not Insane" USB library for STM32F103xx MCUs☆27Updated 5 years ago
- ST-Link dumper firmware☆52Updated 8 months ago
- Library for ht1621-based lcd. Supports bitbanding and SPI. No dependency on MCU or non-standart libs☆18Updated 3 years ago
- STM32H7 Arduino form factor and software compatible board☆28Updated 3 years ago
- Hardware of Jasper's Electronic Load R2☆21Updated 6 years ago
- ☆44Updated last year
- Electronic Dummy Load☆47Updated 2 years ago
- Pure-C utility for programming AVR devices with UPDI interface using a standard TTL serial port☆38Updated 10 months ago
- STM8S Code for The Way of the Register Articles☆24Updated last year
- Library collection for STM8, specifically stm8s103 and stm8s105.☆44Updated 2 years ago
- BSP for N76E003 Series 8051 MCU☆45Updated last year
- ST-Link Research☆22Updated last month
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆32Updated last year