mbevand / ledthemfightLinks
A controller for addressable LED strings. It runs on Raspberry Pi hardware; LED strings are connected directly to GPIO pins. It is easy to use and customize through its built-in web server.
☆33Updated last year
Alternatives and similar repositories for ledthemfight
Users that are interested in ledthemfight are comparing it to the libraries listed below
Sorting:
- A tiny MQTT-powered dashboard and control center.☆68Updated 4 years ago
- Lemon is a notification proxy that supports D-Bus, as well as the Pimoroni Raspberry Pi Unicorn Hat HD, allowing you to build a cheap, op…☆57Updated last month
- A guide to setup the Pimoroni Pico RGB Keypad to interface with OBS Studio.☆18Updated 3 years ago
- Config daemon and application monitor for Raspberry Pi systems☆73Updated 3 years ago
- Streaming using a cheap HDMI capture card and a raspberry Pi to an RTMP Receiver.☆108Updated 4 years ago
- Another Neopixel project driven by the Spark Core☆30Updated 7 months ago
- Source code for the PeloMon Bluetooth LE sensor relay and for decoding Peloton communications☆102Updated last year
- A Pi Zero Magic Mirror Application☆101Updated 2 years ago
- Make your Chromecast devices discoverable and controllable via MQTT.☆45Updated last year
- The talkiepi project is for a truly headless mumble client for the Raspberry Pi, utilizing static config and GPIO for status LEDs and a b…☆290Updated last year
- A fun 70's industrial "launch" control panel with a Yubikey key switch☆20Updated 5 years ago
- Gateway between a Philips Hue bridge and MQTT☆30Updated 5 years ago
- Digital time keeping system with both a web-based calendar entry and a kiosk based badge entry interface☆78Updated 3 weeks ago
- Turn a RPi into an additionnal video output over Ethernet☆150Updated last year
- TallyPi allows you to build network controlled tally lights for live cameras, intended for control by OBS but extensible enough to use fo…☆43Updated 2 years ago
- Home Assistant custom integration for BJ_LED devices☆30Updated last year
- Ubiquiti (ubnt.com) devices discovery for the cli☆28Updated 9 years ago
- DIY Romba Virtual Wall with Atmega 328P Processor + IR LED☆116Updated 3 years ago
- Simulates a pimoroni unicornhat (HD) on your computer☆74Updated 3 years ago
- A Python library to help monitor solar charge controllers typically used in off the grid applications.☆90Updated 2 years ago
- The code and instructions for building Pips - smart, configurable, connected buttons☆21Updated 8 years ago
- Read the data from pimoroni BME680 and display on pimoroni SPI screen☆19Updated 4 years ago
- Sensor by Metriful | Indoor environment monitoring | Documentation and code samples☆114Updated 3 months ago
- A video wall that configures itself by just taking a picture of your screens☆72Updated 7 months ago
- BalenaOS/BalenaCloud based Kiosk using Chromium on a RaspberryPi☆48Updated 5 years ago
- A water detector to prevent flooding that runs on LiPO batteries and transmits its status and notifications via MQTT☆69Updated 6 years ago
- Python library for the Pimoroni LED SHIM☆32Updated 8 months ago
- ☆21Updated last year
- A simple web UI for controlling the GPIO pins on a Raspberry Pi☆75Updated 4 years ago
- ☆83Updated 7 months ago