Alternatives and similar repositories for nissan_ecu_hacking:

Users that are interested in nissan_ecu_hacking are comparing it to the libraries listed below

• MEAT-Inc / Fulcrum
  Fulcrum is the ultimate J2534 DLL Shim written in C++ which is able to pipe data out from the native calls to any other location for supe…
  ☆30Updated last month
• joeFischetti / SimosHighSpeedLogger
  ☆17Updated 3 years ago
• andymartell / e46
  BMW E46 related files
  ☆19Updated 6 years ago
• fanyi3315 / bosch-med17-block-reader
  Decode blocks out of a Bosch MED17 ECU internal flash / EEPROM dump
  ☆18Updated 5 years ago
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆54Updated 6 years ago
• gmenounos / vwcluster
  ☆16Updated last month
• michaeldove / vagtuner
  Volkswagen Audi Group CANBus diagnostic and ECU firmware flashing
  ☆35Updated 8 years ago
• nyetwurk / ME7L
  setzi's ME7L plus a bunch of extra .ecu defines, Makefiles, and scripts
  ☆21Updated 5 years ago
• beyerch / J2534DotNet
  A .Net interface for J2534 vehicle communications.
  ☆19Updated 13 years ago
• Pytrex / NissanDefinitions
  Nissan and Infiniti ECU ROM Definition files for use with RomRaider Editor.
  ☆32Updated last year
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆86Updated last year
• fenugrec / npkern
  Nissan / Infiniti ECU reflashing kernel, for use with nisprog
  ☆50Updated 4 months ago
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆35Updated 6 years ago
• tomaskovacik / VAGRadioRemote
  arduino library for remote controling V.A.G. radios
  ☆10Updated 4 years ago
• fenugrec / nissutils
  ☆52Updated 2 months ago
• mrphyslaw / NissanDefs
  Definition files for Nissan engine control computers to be used with the Rom Raider Ecu Editor.
  ☆26Updated 6 years ago
• reproteq / winols_damos_translator
  winols damos translator
  ☆12Updated 4 years ago
• EliasKotlyar / MED9RamReader
  Utility to read Ram of a MED9.1 ECU
  ☆14Updated last year
• nyetwurk / ecuxplot
  Tool for plotting ME7 (VCDS, ECUx, ME7L) logs
  ☆48Updated 3 months ago
• prj / me7-tools
  ☆36Updated 2 years ago
• 360trev / ME7_95040sum
  BSD Licensed tool written in C for Bosch ME7.x EEPROM data dump checksum validations. Specifically validates dump files for 95040 IC 512b…
  ☆11Updated 12 years ago
• stephendpmurphy / ME7.X_Correction
  GUI for the Bosch ME7.X checksum check and correction CL utilities
  ☆16Updated 3 years ago
• rnd-ash / j2534-arduino-win
  Windows code for J2534 Arduino
  ☆26Updated 4 years ago
• jakka351 / GenericDiagnosticTool
  Generic Diagnostic Tool is an open source, free J2534 PassThru software tool for general purpose use of raw diagnostic protocols on an EC…
  ☆34Updated last week
• 360trev / ME7RomTool_Ferrari
  Bosch ME7.3H4 RomTool for Ferrari 360's
  ☆35Updated 6 years ago
• javiermuniz / ecutools
  Tools for disassembling and analyzing ECUs
  ☆18Updated 12 years ago
• bri3d / TC1791_CAN_BSL
  CAN Bootstrap Loader (BSL) for Tricore AudoMAX (TC1791 and friends), including arbitrary read/write as well as compressed read functional…
  ☆61Updated 3 years ago
• KalebKE / ME7Tuner
  ME7Tuner is software that provides tools to help calibrate the MAF, primary fueling and torque/load requests
  ☆54Updated 6 months ago
• Switchleg1 / BinToolz
  Do stuff with binz and such.
  ☆23Updated 3 months ago
• keenanlaws / J2534-Registry-Info
  This utility searches windows registry for installed j2534 library's , Tool info, and supported communication protocols.
  ☆15Updated 2 years ago