lab11 / bleesLinks
Bluetooth Low Energy Environmental Sensors
☆19Updated 7 years ago
Alternatives and similar repositories for blees
Users that are interested in blees are comparing it to the libraries listed below
Sorting:
- nrf51822 GCC based projects☆28Updated 7 years ago
- ☆30Updated 8 years ago
- Starting point and shared code for Nordic nRF5x BLE platforms.☆91Updated 4 years ago
- Schematics, Gerbers, Bill of materials☆34Updated 10 years ago
- Simple example application showing how to do a custom service. Fully explained in nAN-36, available on www.nordicsemi.com.☆32Updated 9 years ago
- Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.☆59Updated 8 years ago
- The IBM Zurich LMiC codebase☆50Updated 7 years ago
- Nordic stack and drivers for the mbed BLE_API☆46Updated 5 years ago
- Nordic nRF52832 BLE development board with sensors.☆96Updated 6 years ago
- Applications for iOS and Android which pair with Hexiwear BLE devices and send sensor readings to WolkSense sensor data cloud☆29Updated 8 years ago
- RuuviTag firmware projects☆122Updated 4 years ago
- Broadcom WICED patches for MXCHIP EMW wireless ARM platform. Not affiliated with MXCHIP or Broadcom☆55Updated 5 years ago
- HM-10 breakout and related software☆40Updated 10 years ago
- IBM LMIC v1.5 (LoRaWAN in C) adapted to run under the Arduino environment☆43Updated 9 years ago
- This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.☆61Updated 5 years ago
- Tiny BLE is a Bluetooth Low Energy board designed with low energy consumption and small size in mind.☆31Updated 11 months ago
- Wrapper for the Segger J-Link or STLink/V2 (via OpenOCD) to flash nRF51822 MCUs☆42Updated 9 years ago
- Nordic stuff☆40Updated 8 years ago
- WS2812(Neopixel) library for the Nordic Semiconductor 51822 Bluetooth Low Energy ARM SoC.☆60Updated 6 years ago
- Powerdown examples for the nRF51, showing wakeup from system on with RTC and GPIO and from system off from GPIO.☆61Updated 9 years ago
- Arduino port for Quectel BC66 LTE Narow Band modules ( OpenCPU based )☆51Updated 5 years ago
- Raspberry PI iC880A and LinkLab Lora Gateway Shield☆74Updated 5 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆34Updated 6 years ago
- HEXIWEAR firmware☆119Updated 8 years ago
- RuuviTag hardware projects☆115Updated 4 years ago
- Raspberry PI Lora Gateway/Node for RFM92/95/96/98/69HCW Modules☆62Updated 9 years ago
- BASIC interpreter for CC2540 and CC2541 Bluetooth LE chips☆98Updated 7 years ago
- RFM92W/93W - Arduino Powered Low Power Long Range LoRa Transceiver☆26Updated 11 years ago
- Example of using an Arduino and a nRF24L01+ to fake BLE advertisement☆69Updated 11 years ago
- Symbols and Footprints for CadSoft Eagle☆29Updated 6 years ago