jmaygarden / slip-codecLinks
Serial Line Interface Protocol (SLIP) encoder/decoder with Rust std::{Read, Write} interfaces.
☆12Updated 2 years ago
Alternatives and similar repositories for slip-codec
Users that are interested in slip-codec are comparing it to the libraries listed below
Sorting:
- Rust driver for the Semtech SX127x series of Sub-GHz LoRa/ISM radio transceivers☆36Updated 2 years ago
- Microsoft HF2 HID Flashing Format for UF2 Bootloaders☆54Updated 2 years ago
- A platform-agnostic driver for Semtech SX1276/77/78/79 based boards.☆49Updated last week
- ProFont for the embedded-graphics crate☆57Updated 2 years ago
- `fugit` provides a comprehensive library of `Duration` and `Instant` for the handling of time in embedded systems, doing all it can at co…☆66Updated last month
- A driver for the SX126X Family of LoRa modems☆28Updated last year
- RFC 1055 Serial Line Internet Protocol (SLIP) framer for Rust☆14Updated 4 years ago
- ☆48Updated last month
- Port of the fantastic Iconoir Icon Pack to Rust embedded devices, with a focus on speed, usability, and completeness.☆17Updated last year
- Rust DFU protocol implementation for usb-device☆22Updated last year
- An Embedded Storage Abstraction Layer☆80Updated 2 weeks ago
- ☆21Updated 5 months ago
- A simple, single-future, non-blocking executor intended for building state machines. Designed to be no-std and embedded friendly.☆86Updated last year
- A multirotor flight controller firmware you can trust!☆36Updated 6 years ago
- A Rust library for talking to J-Link USB devices☆42Updated 2 years ago
- A Rust interface for the Nordic PPK2☆20Updated 6 months ago
- Implementation of the `embedded-hal` traits for STM32F30x microcontrollers☆35Updated 5 years ago
- Sans IO core library (traits and tools) for DFU☆19Updated 3 weeks ago
- A platform agnostic driver to interface with the nRF24L01 (2.4GHz Wireless) using rust embedded-hal.☆29Updated 5 years ago
- ☆63Updated 2 years ago
- A set of rust crates for making stack dumps and getting stack traces out of them☆78Updated 2 months ago
- ☆27Updated 2 years ago
- Stepper Acceleration Ramp Generator☆29Updated last year
- ☆34Updated 2 years ago
- A dev board designed to facilitate the development of USB firmware for STM32☆30Updated last year
- ☆122Updated last week
- Second stage bootloader for the RP2040, suitable for use with a Rust application.☆84Updated 8 months ago
- Bluetooth HCI implementation for embedded Rust☆54Updated 2 years ago
- ☆109Updated last week
- Rust driver for the Semtec SX128x series of 2.4GHz LoRa/ISM radio transceivers☆16Updated last year