Alternatives and similar repositories for pnpconvert

Users that are interested in pnpconvert are comparing it to the libraries listed below

• adamgreig / stm32ral
  Register access layer in Rust for all STM32 microcontrollers
  ☆34Updated 2 years ago
• Disasm / f042-ftdi
  ☆18Updated 4 years ago
• Atmelfan / scpi-rs
  Rust SCPI parser
  ☆40Updated 3 months ago
• Rahix / Poppy-Logic-Controller
  A budget PLC-like board for controlling 24V DC equipment.
  ☆19Updated last year
• jonas-schievink / jaylink
  A Rust library for talking to J-Link USB devices
  ☆41Updated last year
• ketszim97 / NearField_PCB_Probes
  PCB Design for H Field and E Field Probes
  ☆27Updated 4 years ago
• stm32-rs / stm32-fmc
  Hardware Abstraction Layer for STM32 Memory Controllers (FMC/FSMC)
  ☆18Updated 4 months ago
• adamgreig / ffp
  iCE40 FPGA, SPI flash, and CMSIS-DAP SWD programmer
  ☆69Updated 4 years ago
• probe-rs / hs-probe
  ☆134Updated 3 years ago
• dotcypress / ushell
  🐚 Embedded serial shell
  ☆20Updated 5 months ago
• gulitsky / reactance
  Field-oriented three-phase AC motor controller written in Rust.
  ☆31Updated 2 years ago
• hdoordt / ppk2-rs
  A Rust interface for the Nordic PPK2
  ☆17Updated 9 months ago
• probe-rs / hs-probe-firmware
  A CMSIS-DAP implementation in pure Rust.
  ☆78Updated last year
• spookyvision / embedded-web-ui
  remote UI for embedded (Rust) applications
  ☆13Updated last year
• bjoernQ / svd2html
  A simple script (in Rust lang) to create HTML from SVD
  ☆16Updated last year
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆50Updated 2 months ago
• rp-rs / rp2040-boot2
  Second stage bootloader for the RP2040, suitable for use with a Rust application.
  ☆79Updated 3 weeks ago
• jacobrosenthal / hf2-rs
  Microsoft HF2 HID Flashing Format for UF2 Bootloaders
  ☆51Updated last year
• probe-rs / rusty-probe-firmware
  ☆51Updated 2 weeks ago
• adamgreig / ecpdap
  ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.
  ☆63Updated last year
• dotcypress / ushell-rtic-example
  uShell example
  ☆10Updated 3 years ago
• debug-edge / DebugEdge
  A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
  ☆42Updated 4 years ago
• in3otd / spiki
  A spiral inductor footprint generator for Kicad
  ☆54Updated 4 years ago
• wez / jlink_rtt
  JLINK RTT debugger support for rust
  ☆18Updated 5 years ago
• stm32-rs / synopsys-usb-otg
  usb-device implementation for Synopsys USB OTG IP cores
  ☆45Updated last year
• sipeed / bl602-hal
  Hardware Abstract Layer for BL602 RISC-V WiFi + BLE SoC in embedded Rust
  ☆76Updated last year
• probe-rs / dap-rs
  ☆17Updated last month
• esp-rs / esp-flasher-stub
  Rust implementation of flasher stub located in esptool
  ☆22Updated 7 months ago
• cs2dsb / stm32-usb.rs
  A dev board designed to facilitate the development of USB firmware for STM32
  ☆30Updated 10 months ago
• ftdi-rs / ftdi-embedded-hal
  Implementation of Rust Embedded HAL traits for FTDI devices
  ☆38Updated last month