ftjuh / I2CwrapperLinks
I2Cwrapper is a firmware framework which helps you implement Arduino based I2C target (slave) devices for control of non-I2C hardware. Supports plain Arduinos, ESP8266, ESP32, SAMD, STM32, and ATtiny platforms.
☆36Updated 2 years ago
Alternatives and similar repositories for I2Cwrapper
Users that are interested in I2Cwrapper are comparing it to the libraries listed below
Sorting:
- Load the calibration data and provide a calibrated analog read☆44Updated last year
- Arduino Command Line Utility☆31Updated last year
- A frequency counter library for esp32☆45Updated last year
- Simple RPM-Meter☆57Updated 3 years ago
- Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd☆58Updated 4 years ago
- Collection of SAMD Development Boards, Programmers, Tools and Firmware☆30Updated 4 years ago
- ☆12Updated 6 years ago
- Simple library to exchange data between the 2 cores of a Raspberry Pi Pico under Arduino IDE framework☆28Updated 2 years ago
- Is this hardware solution the ultimate in switch bounce elimination? Simple PCB, cheap components = final solution!☆13Updated 4 years ago
- This repository contains code and diagram for ESPNOW RC Car using esp32☆47Updated 3 years ago
- ☆48Updated 4 months ago
- Simple USB Power Tester☆56Updated 3 years ago
- Motor control using ESP32 MCPWM☆47Updated 2 years ago
- ESP32-S3 with 4.3' TFT 480x270 driver NV3041A and capacitive touch☆40Updated last year
- Arduino library for INA3221 current and voltage sensor.☆19Updated 8 months ago
- ☆16Updated 2 years ago
- ☆70Updated 2 weeks ago
- Arduino Library to approach PCA9555 I2C expander with digitalRead, digitalWrite and pinMode functions☆33Updated 2 months ago
- Reflow controller with ESP32 and TFT LCD on board.☆69Updated 7 months ago
- Extend the possibilities of cheap digital power supplies with a WiFi module☆60Updated last year
- ☆15Updated 4 years ago
- ☆36Updated 11 months ago
- DIY portable Wi-Fi enabled signal generator☆42Updated 5 years ago
- Arduino library for 4x4 (or smaller) keypad connected to an I2C PCF8574.☆66Updated 4 months ago
- Battery tester with arduino, with thermistor to check temperature of power resistance and battery. On version 0.2 now It's possible to se…☆27Updated 2 years ago
- This library enables you to use Interrupt from Hardware Timers on supported Arduino boards such as AVR, ESP8266, ESP32, SAMD, SAM DUE, nR…☆40Updated 3 years ago
- RemoteXY library for Arduino IDE☆65Updated 2 months ago
- ENC28J60 Ethernet driver for ESP32-Arduino 2.0.x / 3.0.x, lwip compliant☆43Updated last year
- This is small and fast Arduino library for Rotary Encoder with interrupts.☆86Updated 6 months ago
- Arduino library to implement an I2C scanner.☆19Updated 2 weeks ago