Alternatives and similar repositories for pysiaalarm:

Users that are interested in pysiaalarm are comparing it to the libraries listed below

• schmupu / ioBroker.sia
  SIA server for burglar alarm system
  ☆52Updated last week
• jvanovost / dc09_spt
  A set of python classes to implement an Secure Premises Transceiver (dialler) using the SIA-DC09 protocol set and conforming to the EN-50…
  ☆35Updated 7 months ago
• Supergiovane / node-red-contrib-hikvision-ultimate
  A native set of node for Hikvision Cameras, Doorbells, Alarms, Radars etc.
  ☆53Updated 2 weeks ago
• scudre / alarm-central-station-receiver
  Python daemon for receiving events from a home alarm system via Contact ID protocol
  ☆38Updated 6 years ago
• TECH7Fox / asterisk-hass-addons
  Asterisk add-on for Home Assistant
  ☆82Updated 3 weeks ago
• elad-bar / DahuaVTO2MQTT
  Listens to events from Dahua VTO unit and publishes them via MQTT Message
  ☆103Updated 3 years ago
• tdeckers / utcar
  Integration for ATS2000IP alarm system
  ☆12Updated last year
• CreepPork / py-sia-dc-07
  A Python script which will listen on a TCP/IP port and forward messages to a HTTP endpoint from a SIA DC-09 protocol supported device
  ☆11Updated last year
• girlpunk / hass-asterisk
  Home Assistant platform for Asterisk integration
  ☆12Updated 4 years ago
• zoilomora / hikvision-to-mqtt
  Sends alarm events from Hikvision DVR to MQTT
  ☆21Updated last year
• ioprev / shelly-firmware
  A Python script for creating a fully functional image of the official Shelly firmware
  ☆47Updated last year
• LordMike / MBW.BlueRiiot2MQTT
  Utility to map between Blue Riiots pool API, and Home Assistant MQTT
  ☆49Updated last year
• psyciknz / CameraEvents
  Dahua NVR/Camera Alerting to MQTT. Fairly specific to my needs, but also an attempt at starting to use travis.
  ☆59Updated last month
• weigu1 / SmartyReader
  ☆13Updated last year
• rjdekker / MHI2MQTT
  Arduino-based WiFi/MQTT controller for wireless operation of a Mitsubishi Heavy Industries air conditioner through its serial CNS port
  ☆141Updated last year
• Tho85 / ws2mqtt
  Connect WiSafe2 devices to Home Assistant
  ☆29Updated last year
• olalid / SmartRoomSensor
  Smarter replacement for the RG20 room sensor that is an optional extra for some NIBE heat pumps.
  ☆19Updated 7 years ago
• Supergiovane / node-red-contrib-sia-ultimate
  Connect your SIA-DCS compatible alarm system to node-red. It works with Ajax System too.
  ☆19Updated 10 months ago
• Tertiush / ParadoxIP150v2
  Python-based IP150 'middle-ware' that uses the IP module's software port for monitoring and control of the alarm via an MQTT Broker.
  ☆73Updated 4 years ago
• jagheterfredrik / wallbox-mqtt-bridge
  MQTT Bridge enables fully local, cloud-free, control of your Wallbox Pulsar Plus and Copper SB
  ☆26Updated 5 months ago
• tmjo / charger-card
  A lovelace card for electrical vehicle (EV) home chargers and charging robots.
  ☆100Updated 10 months ago
• bebben88 / NibePi
  ☆81Updated 4 years ago
• windkh / node-red-contrib-shelly
  Shelly control nodes for node red.
  ☆36Updated last month
• TECH7Fox / asterisk-hass-integration
  Asterisk integration for Home Assistant
  ☆72Updated 10 months ago
• svrooij / sonos2mqtt
  Sonos mqtt controller. Control your speakers from your mqtt server. mqtt-smarthome insprired.
  ☆76Updated 2 weeks ago
• james-fry / hassio-addons
  Repository for hass.io add ons
  ☆100Updated 4 years ago
• joshbenner / esphome-daikin-s21
  ESPHome Component for Daikin Mini-Splits using the S21 serial port.
  ☆78Updated last week
• docbobo / home-assistant-miele
  Home Assistant support for Miele@home connected appliances
  ☆37Updated 4 years ago
• alexander-vitishchenko / hc3-to-mqtt
  Fibaro HC3 integration with Home Assistant & NodeRed
  ☆33Updated 9 months ago
• dev-lab / esp-iot-mbus
  M-Bus gateway with web server based on ESP8266 NodeMCU
  ☆25Updated 4 months ago