davidcranor / Thinner-ClientLinks
This project implements an STM32F based thin client which can send and receive data over serial, read a PS/2 keyboard, and display the contents of a 480x240 framebuffer on an NTSC television.
☆59Updated 15 years ago
Alternatives and similar repositories for Thinner-Client
Users that are interested in Thinner-Client are comparing it to the libraries listed below
Sorting:
- A frequency / Hertz meter based on STM32F103 MCUs.☆49Updated 7 years ago
- Example codes using sdcc to target STM8S MCUs.☆46Updated 5 years ago
- PAL video signal generation with a STM32 using the builtin peripherals☆40Updated 5 years ago
- ☆59Updated 11 years ago
- ST-Link dumper firmware☆53Updated last year
- Maple Mini schematics and layout☆85Updated 13 years ago
- This is the fast avr programmer for AVR MCUs based on cheap stm32f103c8t6 board with usb-to-serial support.☆103Updated 2 months ago
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆142Updated 2 years ago
- Serial bootloader for STM8 microcontrollers☆99Updated 8 months ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆166Updated 8 years ago
- PC tool for uplading hexfiles to the STM8 microcontroller via UART or SPI , using the built-in ROM bootloader. Works under Windows and Po…☆87Updated last year
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆90Updated 4 years ago
- Yes, your Arduino can replace an expensive JTAG cable!☆157Updated 12 years ago
- Raspberry PI bare metal☆48Updated 11 years ago
- MCP2221 HID Library☆60Updated 6 years ago
- Tiny peripheral library for STM8 microcontrolles☆125Updated 3 years ago
- Flash programming utility for Microchip PIC32 microcontrollers☆119Updated 10 months ago
- JTAG library for Arduino☆142Updated 10 months ago
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆154Updated 7 years ago
- An implementation of the SWD protocol using the Bus Pirate☆90Updated 7 years ago
- Программная реализация USB на STM8S103☆102Updated 9 years ago
- GerbMerge — a command-line tool to merge multiple RS-274X Gerber files☆60Updated 3 years ago
- FX2 EZ USB eeprom reader/writer for libusb☆30Updated 2 years ago
- Triple USB-to-serial adapter firmware for flashing onto an STM32F103C8T6 "blue pill" minimum development board ⛺☆139Updated 5 years ago
- copy of the same project from sourceforge☆79Updated 5 years ago
- fat32 emulation library for stm32f4☆40Updated 8 years ago
- This is a bare metal VGA Text library + projects/examples for the STM32F030F4☆66Updated 7 years ago
- DFU bootloader for STM32F103, for use with any F103 code and target☆31Updated 9 years ago
- Alternative Logic16 Firmware☆37Updated 10 years ago
- PDK FPPA disassembler, simulator, ...☆44Updated 4 years ago