chandrawi / LoRaRF-PythonLinks
Python library for basic transmitting and receiving data using LoRa and FSK modem
☆58Updated 7 months ago
Alternatives and similar repositories for LoRaRF-Python
Users that are interested in LoRaRF-Python are comparing it to the libraries listed below
Sorting:
- Semtech SX126X LoRa driver for Micropython and CircuitPython.☆129Updated 9 months ago
- MicroPython Library for SX1276 (A Long Range Radio Chip from Semtech)☆39Updated last year
- Arduino & ESP-IDF libraries written for AXP19x, 20x☆93Updated 2 years ago
- UDP Packet Forwarder for Docker☆33Updated 7 months ago
- Wristband with LoRa and GPS☆55Updated 3 years ago
- Wifi & BLE driven passenger flow metering with cheap ESP32 boards☆89Updated 11 months ago
- An Arduino Library for LoRa Communication using SX1262/1268☆49Updated 4 months ago
- CircuitPython module for the RFM95/6/7/8 LoRa wireless 433/915mhz packet radios.☆75Updated last month
- Enable LoRaWAN communications on your Raspberry Pi Pico or any RP2040 based board. 📡☆28Updated 2 years ago
- Quickstart, tutorials and examples for the RAKwireless WisBlock product line.☆198Updated 2 weeks ago
- The LoRaMesher library implements a distance-vector routing protocol for communicating messages among LoRa nodes.☆204Updated this week
- This is a python interface to the Semtech SX127x, HopeRF RFM9x, Microchip RN2483 long range, low power transceiver families.☆63Updated 6 years ago
- raspi-lora for micropython☆85Updated last year
- BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino☆81Updated 4 years ago
- Library to work with Semtech chips SX1276/SX1277/SX1278/SX1279.☆49Updated 2 months ago
- Open source files for RAK2270 Sticker Tracker☆27Updated last month
- LoraWAN gateway with RAK831/iC880A and Raspberry Pi Zero W for TheThingsNetwork☆105Updated 3 years ago
- T3☆115Updated 2 years ago
- Arduino library for basic transmitting and receiving data using LoRa and FSK modulation☆74Updated last year
- ☆46Updated 4 years ago
- A FreeDV device based on the ESP32.☆104Updated 8 months ago
- ESP32-based LoRa ground station☆31Updated 4 years ago
- SX127x (LoRa transceiver) driver for (Micro)Python on ESP8266/ESP32/Raspberry_Pi☆151Updated last month
- ESP32 using MicroPython meets LoRa and LoRaWAN.☆238Updated last year
- Reports on the tests carried out on the SX1280 LoRa device☆65Updated 4 years ago
- ☆48Updated last month
- TTGO Lora Test code☆180Updated 4 years ago
- MicroPython library for controlling a Semtech SX127x LoRa module over SPI.☆50Updated 2 years ago
- HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/☆28Updated 2 months ago
- This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.☆40Updated 4 years ago