andygock / glcd
Graphic LCD Library for microcontrollers based embedded systems. Compatible with chipsets PCD854, ST7565R, NTD75451 and many AVR, LPC, PIC, STM32 devices.
☆101Updated 3 years ago
Alternatives and similar repositories for glcd:
Users that are interested in glcd are comparing it to the libraries listed below
- Serial bootloader for STM8 microcontrollers☆96Updated 5 years ago
- Tiny text-orientated menu library in C for embedded use.☆75Updated 5 years ago
- Tiny peripheral library for STM8 microcontrolles☆122Updated 2 years ago
- An STM32 based datalogger with micro SD card and USB support☆78Updated 11 years ago
- Automatically exported from code.google.com/p/m2tklib☆49Updated 6 years ago
- Generic implementation of Arduino for STM32 boards☆121Updated 3 years ago
- Various libraries for STM32F103 microcontroller and HY-STM32 board☆50Updated 8 years ago
- Bootloader firmware for the Maple ARM Cortex-M3 development board from LeafLabs☆140Updated 10 years ago
- LeafLabs Maple Hardware Design Files☆108Updated 12 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆88Updated 4 years ago
- Cross-platform STLink v2 GUI☆188Updated 4 years ago
- USB MSD (Mass Storage Device) bootloader for Atmel SAMD chips☆36Updated 8 years ago
- STM32CubeMX project to Makefile converter☆152Updated 7 years ago
- Efficient DMA timeout mechanism for peripheral DMA configured in circular mode demonstrated on a STM32 microcontroller.☆132Updated 7 years ago
- Enables reading and writing on SD card using SD card slot of the STM32 Board.☆162Updated last month
- STM8S Standard Peripheral Library Ported to SDCC for multiple STM8 targets☆69Updated last year
- STM32 ILI9341 spi☆88Updated 6 years ago
- A template for builting STM23F0 ARM projects with GCC☆127Updated 2 years ago
- Wolk STM8 stuff☆33Updated 10 years ago
- WS2812 DMA library with low RAM needs. Up to 16 paralel outputs and thousands of LEDs on each of them☆120Updated 3 years ago
- STM8 core support for Arduino☆142Updated last year
- Web App for flashing STM microcontrollers (STM8 and STM32) over serial port using the embedded ROM bootloader.☆32Updated 3 years ago
- Software UART implementation for the AVR platform☆86Updated 14 years ago
- DFU bootloader for STM32F103, for use with any F103 code and target☆30Updated 8 years ago
- Terminal inside the microcontroller (cli for mcu)☆46Updated 2 years ago
- This example will show you how to program STM32 in C++ with STM32 HAL drivers and STM32CubeMX generated code frame☆40Updated 9 years ago
- Lightweight onewire protocol library for embedded systems. It uses UART peripheral or GPIO toggling☆201Updated this week
- This repository contains bootloader for stm32f1xx microcontrollers. It works for stm32f103ret6, but you can simply adopt it to any MCU su…☆48Updated last year
- Full Firmware Package for the STM32L1 series: HAL+LL drivers, CMSIS, BSP, MW, plus a set of Projects (examples and demos) running on all …☆38Updated 3 weeks ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆157Updated 7 years ago