alexfukahori / rpi-pwm-fan-controlLinks
This Python script was created for the purpose to control a PWM FAN Noctua NF-A4x20 5V, using Raspberry Pi 4B hardware features. The script use WiringPi-Python as a dependecy, it is used to set Hardware PWM value clock as 25Khz that was specified by Intel (c.f. “4-Wire Pulse Width Modulation (PWM) Controlled Fans”, Intel Corporation September 20…
☆30Updated last year
Alternatives and similar repositories for rpi-pwm-fan-control
Users that are interested in rpi-pwm-fan-control are comparing it to the libraries listed below
Sorting:
- raspberry pi pwm fan control☆69Updated 2 years ago
- ESP8266 --> InfluxDB low power temperature sensor☆11Updated 2 years ago
- Raspberry Pi Adjust Fan Speed With Temperature [C - WiringPi - Pigpio - Noctua PWM Fan]☆40Updated last year
- a weather display for a raspberry pi and a TFT display written in python3 and pygame☆83Updated 3 years ago
- ESP8266 and OLED Pi-hole Monitor☆86Updated 2 years ago
- Find ESP8266 modules in the /24 network neighborhood, and collect infos about them. (ESPEasy,Tasmota,ESPurna,Tuya,Shelly)☆21Updated last year
- Raspberry Pi PWM fan contorl (for Notcua PWM fans)☆86Updated 2 years ago
- A Raspberry Pi System Configuration Reporting Tool☆48Updated 3 years ago
- An all-in-one ESP8266 based weather station.☆19Updated 3 years ago
- Control a Raspberry Pi fan based on temeperature☆48Updated 5 months ago
- RTL8812BU Driver for Raspbian☆71Updated 2 years ago
- This repo is a collection of scripts for the Raspberry Pi.☆30Updated 7 years ago
- A simple Python script than when run on a Raspberry Pi Compute module 4 will use a fan curve to control a pwm fan.☆11Updated 3 years ago
- ☆29Updated 5 years ago
- UPS Hat is a 5v power supply, It fit at the top of the raspberry pi, it gives power backup, while raspberry pi's USB power is cut off. It…☆17Updated last year
- Some Python Sensor Scripts for raspberry pi. Including Homie MQTT and MQTT publishing☆17Updated last year
- All of my ESPHome configuration files☆17Updated last month
- This script reads metadata from Apple AirTags and publishes them over MQTT☆10Updated 2 years ago
- ☆28Updated 3 years ago
- AZ-Touch PiZero Weatherstation☆39Updated 4 years ago
- Display currently playing info, with remote control, using shairport-sync's MQTT support☆35Updated last year
- Raspberry Pi wireless Access Point: This repo automates the config of hostapd, dnsmasq, dhcpcd & wpa_supplicant to transform a Pi into an…☆86Updated 5 years ago
- EHLPC: EspHome-Led-Clock (for MAX7219 Digit Display Clocks)☆20Updated last week
- Guide to set raspberry pi as wifi access point - bridge☆64Updated 10 months ago
- Enable TRIM on a Raspberry with a simple script.☆16Updated 3 years ago
- Kootnet Network Testers - Network Testing Software☆42Updated 2 years ago
- This is a list of i2c Codes utilized by Argon ONE Raspberry Pi Cases☆76Updated 4 years ago
- UPS Plus is a new generation of UPS power management module. It is an improved version of the original UPS prototype. It has been fixed t…☆79Updated 11 months ago
- An environment monitor based on a Raspberry Pi Zero W, a Pimoroni Enviro+ and a Plantower air quality sensor to monitor, display and repo…☆86Updated 11 months ago
- Incrementally clone a running Raspberry Pi to a destination SD card/device or a file (on a NAS or external drive). Supports NOOBS setups.☆43Updated 5 years ago