adamgreig / labrador-ldpc
LDPC encoding and decoding for Labrador
☆35Updated last year
Alternatives and similar repositories for labrador-ldpc
Users that are interested in labrador-ldpc are comparing it to the libraries listed below
Sorting:
- Rust on the Zynq UltraScale+ MPSoC☆41Updated 5 years ago
- ☆30Updated 2 years ago
- Language for composable analysis and generation of digital, analog, and RF signals☆55Updated 2 months ago
- Library for interfacing with the RTT (Real-Time Transfer) debugging protocol over probe-rs☆23Updated 3 years ago
- A Rust library for talking to J-Link USB devices☆41Updated last year
- Abstractions for asynchronous programming on the STM32F1xx family of microcontrollers.☆23Updated 3 years ago
- A multirotor flight controller firmware you can trust!☆34Updated 6 years ago
- Rust interface to the Linux Industrial I/O subsystem☆51Updated this week
- ☆16Updated last year
- A dev board designed to facilitate the development of USB firmware for STM32☆30Updated 10 months ago
- Cortex-M Interrupt Move☆26Updated 5 years ago
- Converter of register descriptions from the TI DSLite format to CMSIS SVD format☆35Updated last year
- A generic bbqueue based transport for defmt log messages☆20Updated 3 years ago
- Rust driver for the Semtec SX128x series of 2.4GHz LoRa/ISM radio transceivers☆16Updated last year
- An Embedded Storage Abstraction Layer☆76Updated 5 months ago
- Corny COBS encode/decode for Rust no_std targets☆21Updated 2 years ago
- Just like `Cell` but with volatile read / write operations☆18Updated last year
- Register access layer in Rust for all STM32 microcontrollers☆34Updated 2 years ago
- A universal set of specific error kinds for use in embedded systems☆17Updated 4 years ago
- Minimal startup / runtime for MSP430 microcontrollers☆16Updated 2 years ago
- Provides macros and type definitions for using shared-bus in an RTIC application☆17Updated 10 months ago
- Consistent Overhead Byte Stuffing☆50Updated last week
- Platform agnostic Rust driver for 24x series serial EEPROM devices using embedded-hal☆34Updated 11 months ago
- An example of a common Wi-Fi set up scenario on ESP32 using Rust☆16Updated last year
- Rust DFU protocol implementation for usb-device☆22Updated last year
- A simple, single-future, non-blocking executor intended for building state machines. Designed to be no-std and embedded friendly.☆85Updated last year
- SDR DSP for Rust☆25Updated 4 years ago
- Check https://github.com/ftdi-rs project for the up-to-date implementation of FTDI MPSSE embedded HAL.☆31Updated 3 years ago
- Minimal and reusable non-blocking I/O layer☆95Updated last year
- ☆45Updated last week