adafruit / tinyuf2
UF2 bootloader based on TinyUSB for embedded devices such as ESP32S2, STM32F4 and iMX RT10xx
☆367Updated 2 weeks ago
Alternatives and similar repositories for tinyuf2:
Users that are interested in tinyuf2 are comparing it to the libraries listed below
- virtual debug pod for RP2040 "Raspberry Pi Pico" with no added hardware☆395Updated 2 years ago
- UF2 bootloader for STM32F103 (Blue Pill etc)☆116Updated 5 years ago
- Free and open implementation of the CMSIS-DAP debugger firmware☆281Updated 11 months ago
- ☆168Updated 2 months ago
- ☆439Updated last month
- Yet Another Picoprobe☆144Updated last month
- PlatformIO platform for CH32V RISC-V chips (CH32V003, CH32V103, CH32V20x, CH32V30x, CH32X035) and CH56x, CH57x, CH58x, CH59x☆273Updated last week
- The datasheet/SDK/HDK docmentation of Bluetooth LE RISC-V MCU CH582M/CH583M☆145Updated 9 months ago
- USB-enabled bootloaders for the nRF52 BLE SoC chips☆504Updated last month
- CH554 software development kit for SDCC☆310Updated last year
- Firmware source and binaries for the RP2040-based Debug Probe accessory☆882Updated this week
- Rust-based Command Line Tool for WCH MCU USB-ISP Programming☆208Updated 2 months ago
- Blackmagic Wireless SWD Debug probe hosted on esp-idf SDK (for ESP8266) with UART on Telnet port and HTTP using xterm.js☆270Updated last year
- Collection of various development boards for microcontrollers (e.g., CH55x, CH32, PY32, STC8, STM32) and accompanying example software.☆187Updated 2 months ago
- CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10☆435Updated last week
- A serial bootloader for the Raspberry Pi RP2040 (Pico)☆98Updated 2 years ago
- USB to UART&JTAG bridge, implemented on ESP32-S2 or ESP32-S3☆323Updated last month
- Customer-allocated USB PIDs under the Espressif VID☆97Updated this week
- DFU Bootloader for STM32 chips☆342Updated last month
- ☆89Updated 3 weeks ago
- USB-C PD3.0 PPS on ATMega32U4 Arduino board☆401Updated 3 years ago
- Core library for CH32duino☆299Updated 6 months ago
- ☆504Updated this week
- UF2 bootloader for STM32F4☆118Updated 3 years ago
- An open sourced python tool for flashing WCH CH55x series USB microcontroller with bootloader v2.30, v2.31 & v2.40.☆160Updated last year
- ☆263Updated 3 years ago
- JLC2KICAD_lib is a python script that generate a component library (schematic, footprint and 3D model ) for KiCad from the JLCPCB/easyEDA…☆271Updated last month
- Convert EasyEDA designs to KiCad EDA☆301Updated last year
- Export a JLCPCB Compatible BOM directly from your KiCad schematic☆194Updated last year
- Arduino library for TinyUSB☆544Updated last week