SPEC-Sensors / ULPSMLinks
Public Arduino Library for ULPSM (ultra-low power sensor module) or SDK (sensor development kit)
☆25Updated 3 years ago
Alternatives and similar repositories for ULPSM
Users that are interested in ULPSM are comparing it to the libraries listed below
Sorting:
- Arduino Core for STM32L0☆125Updated 2 years ago
- This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.☆40Updated 4 years ago
- Collection of sketches using the Arduino core for Murata's CMWX1ZZABZ (STM32L082 and SX1276)☆101Updated 2 years ago
- This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.☆61Updated 5 years ago
- An Arduino library for sending and receiving data using LoRaWAN protocol and LoRa® radios.☆91Updated 3 weeks ago
- Benchmark CPU Performance on Arduino Compatible Boards☆111Updated 3 years ago
- RUI3 BSP for RAK3172 modules☆28Updated last week
- Generic Node Sensor Edition☆118Updated 2 years ago
- Firmware for u-blox NINA W102 WiFi/BT module☆144Updated 3 weeks ago
- Enable LoRaWAN communications on your Raspberry Pi Pico or any RP2040 based board. 📡☆158Updated 5 months ago
- Arduino library to support I-NUCLEO-LRWAN1 LoRa® expansion board based on USI® LoRaWAN™ technology module.☆16Updated 11 months ago
- A simple SX1303 based LoRa Gateway for FeatherWing ecosystem.☆25Updated 4 years ago
- [Archived] Arduino core supporting mbed-enabled boards☆86Updated 4 years ago
- BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino☆81Updated 4 years ago
- A port of FreeRTOS that runs on Arduino Samd21 boards☆63Updated 4 years ago
- Airtime calculator for LoRaWAN☆53Updated last year
- ☆23Updated 3 years ago
- This is a fork from arduino/ArduinoCore-samd on GitHub. This will be used to maintain Arduino support for SAM D|L|C (M0+ and M4F) boards …☆107Updated last year
- LoRaWAN Library☆70Updated last year
- LoRa-E5 Breakout board☆39Updated 3 years ago
- Disk91 STM32 IoT SDK☆46Updated 3 months ago
- Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.☆24Updated 7 years ago
- Arduino core to support the Apollo3 microcontroller from Ambiq Micro☆88Updated 6 months ago
- ☆36Updated last month
- Port of STM32WLxx example for RAK3172☆33Updated 2 years ago
- Esp32 ULP I2C code and bmp180 example☆101Updated 4 years ago
- Example code and description how to use ESP32 low noise amplifier (LNA), including Arduino library and ESP-IDF component☆53Updated 5 years ago
- Gerber Layout of the UCA board☆40Updated 4 years ago
- Femto ESP32 Micro USB☆33Updated 4 years ago
- Simple LoRaWAN example application for mbed OS☆83Updated 2 years ago