Protocentral / Pulse_MAX30102Links
☆32Updated 4 years ago
Alternatives and similar repositories for Pulse_MAX30102
Users that are interested in Pulse_MAX30102 are comparing it to the libraries listed below
Sorting:
- Nordic nRF52832 BLE development board with sensors.☆96Updated 6 years ago
- Example code and description how to use ESP32 low noise amplifier (LNA), including Arduino library and ESP-IDF component☆53Updated 5 years ago
- Based on https://github.com/igrr/esp32-cam-demo extended with an ILI9341 display, with a Telnet interface to change OV7670 settings on th…☆80Updated 7 years ago
- Broadcom WICED patches for MXCHIP EMW wireless ARM platform. Not affiliated with MXCHIP or Broadcom☆55Updated 5 years ago
- Programmers for Attiny and STM32 MCU☆44Updated 7 years ago
- Library for Arduino IDE to send AT or ASCII commands via UART☆48Updated 4 years ago
- ESP32 iot uno board☆51Updated 8 years ago
- Non DMA version of the spi_master driver with ILI9431&ILI9488 example☆36Updated 8 years ago
- Powerdown examples for the nRF51, showing wakeup from system on with RTC and GPIO and from system off from GPIO.☆61Updated 9 years ago
- ADS1220 arduino library☆47Updated 2 years ago
- A library for the Maxim MAX30100 pulse oximetry chip☆37Updated 7 years ago
- How to develop on nRF52832 with buttonless DFU service☆53Updated 7 years ago
- Breakout board for the Nordic nRF52832, a BLE/ANT/2.4GHz, Cortex-M4F SoC.☆75Updated 4 years ago
- ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG☆50Updated last year
- Updating the ESP32 over-the-air☆64Updated 8 years ago
- WebSocket example project for the Espressif ESP32☆75Updated 6 years ago
- Sensor Node STM8, Server C++ Raspberry pi, Webclient with d3js and websockets☆55Updated 5 years ago
- Arduino port for Quectel BC66 LTE Narow Band modules ( OpenCPU based )☆51Updated 5 years ago
- Nordic stuff☆40Updated 8 years ago
- Sensything is an ESP32-based IoT device that has multiple sensor interfaces to read from and send data from both analog and digital senso…☆20Updated 6 years ago
- Si4432 Library for Arduino☆42Updated 6 years ago
- nRF52 custom RF mesh sensors and dongle firmware using nRF SDK☆93Updated 3 years ago
- Arduino library to use timer 2 with a configurable resolution. Based on MsTimer2 by Javier Valencia. Written for the project associated w…☆42Updated 3 years ago
- Arduino core for nrf52 cpu☆39Updated 5 years ago
- Arduino code for connecting to LoRa IoT gateway at Temasek Polytechnic☆27Updated 4 years ago
- Ported Arduino libraries ready for STM32duino project.☆49Updated 6 years ago
- LeafLabs Maple Hardware Design Files☆109Updated 13 years ago
- A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.☆43Updated 3 years ago
- Breakout board for the Maxim MAX3003 single-channel ECG AFE☆45Updated last month
- Semtech's LoRa RF drivers for mbed OS☆34Updated 5 years ago