Alternatives and similar repositories for usbasp:

Users that are interested in usbasp are comparing it to the libraries listed below

• sfrwmaker / soldering_907_lcd
  The soldering controller for hakko 907 with lcd screen
  ☆28Updated 5 years ago
• bperrybap / usbasp
  My repo for experimenting with the usbasp firmware from www.fischl.de
  ☆36Updated 7 years ago
• mariusgreuel / USBasp
  USBasp - USB programmer for Atmel AVR controllers (with WinUSB support)
  ☆36Updated 7 months ago
• MCUdude / microUPDIcore
  Arduino core for flashing mEDBG firmware onto the microUPDI programmer
  ☆20Updated 2 months ago
• rogerclarkmelbourne / STM32_Pill_Boards
  Various STM32 boards in a form factor similar to the Maple Mini or Blue Pill board
  ☆49Updated 5 years ago
• roybaer / sduino_uno
  A development board with STM8S105K6 MCU in Arduino UNO form factor
  ☆17Updated 7 years ago
• jbtronics / WireDebugger
  Debug AVRs with DebugWire via SerialPort
  ☆21Updated 7 years ago
• SUNsung / HScope_PCB
  ☆24Updated 6 years ago
• cpldcpu / USBasp-t
  USBasp for ATtiny85
  ☆33Updated 2 years ago
• stevstrong / Adafruit_TFTLCD_8bit_STM32
  Adafruit TFT library using 8 bit parallel access ported to STM32
  ☆49Updated 5 years ago
• RobTillaart / I2C_LCD
  Arduino library for I2C LCD displays e.g. 20x4
  ☆13Updated 4 months ago
• estechnical / reflowOvenController
  ESTechnical Reflow Oven Controller source code and instructions
  ☆47Updated 9 years ago
• wagiminator / ATtiny84-TinyHVSP
  High-Voltage Serial Programmer and Fuse Resetter
  ☆28Updated 2 years ago
• Upcycle-Electronics / AVR-Transistor-Tester
  ☆44Updated 6 years ago
• gavinlyonsrepo / Cap_meter_arduino
  Capacitance meter, Arduino-based, three tests , range 18pf to 4F , Push Button input , OLED and serial monitor output.
  ☆16Updated last year
• RobTillaart / ParallelPrinter
  Arduino library that implements a parallel printer - print interface
  ☆14Updated 9 months ago
• WeActStudio / WeAct_HID_Bootloader_F4x1
  WeAct_HID_Bootloader_F4x1 base on STM32_HID_Bootloader
  ☆40Updated 5 years ago
• unfrozen / stm8_libs
  Library collection for STM8, specifically stm8s103 and stm8s105.
  ☆44Updated 2 years ago
• brianpepin / avr_programmer
  Eagle files and gerbers for a programmer designed for Microchip's series of AVR microcontrollers
  ☆22Updated 2 years ago
• JChristensen / JC_EEPROM
  Arduino library to support external I2C EEPROMs.
  ☆14Updated 10 months ago
• zsccat / HVPP-Configurator
  AVR HVPP Configurator
  ☆14Updated 5 years ago
• stevstrong / Arduino_STM32
  Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 and STM3…
  ☆39Updated last month
• ZakKemble / millis
  Lightweight millisecond tracking library
  ☆43Updated 2 years ago
• RobTillaart / I2CKeyPad8x8
  Arduino library for 8x8 or smaller KeyPad connected to an I2C PCF8575.
  ☆13Updated 3 months ago
• wagiminator / ATtiny13-TinyProbe
  Simple Logic Probe
  ☆40Updated 2 years ago
• stefanbeller / USBasp
  USBasp originally from http://www.fischl.de/usbasp/
  ☆56Updated 7 years ago
• baoshi / I2C-LED
  ☆23Updated 11 years ago
• jbtronics / AVR-ZIF-Programmer
  An AVR Programmer based on USBasp which uses a ZIF-Socket for Programming.
  ☆10Updated 3 years ago
• MCUdude / optiboot_flash
  Optiboot subtree for MightyCore, MegaCore, MiniCore and MajorCore
  ☆57Updated 2 years ago
• baracudaz / usb-sht
  Project is to demonstrate AVR ATmega8 running V-USB stack communication with Sensirion SHT-1x Humidity and Temperature Sensor
  ☆15Updated 11 years ago