Ho-Ro / ArdPicProgLinks
Arduino-based solution for programming Microchip PIC microcontrollers. Use host program "ArdPicProg" together with Arduino software "ProgramPic".
☆29Updated last year
Alternatives and similar repositories for ArdPicProg
Users that are interested in ArdPicProg are comparing it to the libraries listed below
Sorting:
- Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython☆33Updated last year
- High-Voltage Serial Programmer and Fuse Resetter☆30Updated 2 years ago
- Arduino RF rolling code keeloq receiver☆20Updated 10 months ago
- Open USB Programmer project for PIC MCU based on Arduino (ATMEGA328)☆16Updated last month
- Capacitance meter, Arduino-based, three tests , range 18pf to 4F , Push Button input , OLED and serial monitor output.☆18Updated last year
- Power Supply Analyzer with USB Interface☆52Updated 2 years ago
- ☆19Updated 2 years ago
- Simple Logic Probe☆42Updated 2 years ago
- Simple logic probe for electronic circuits☆25Updated last year
- Electronic Dummy Load☆48Updated 2 years ago
- Simple USB Power Tester☆54Updated 2 years ago
- Simple RPM-Meter☆57Updated 2 years ago
- usbasp improved firmware☆56Updated 4 years ago
- 8-bit PIC programmer built around AVR/Arduino platform. Just because I can.☆43Updated 2 years ago
- A handheld tool that gives a visual indication of the frequency or voltage at the probe.☆25Updated 4 years ago
- IR Remote Control☆81Updated 2 years ago
- This is the PICkitPlus device database repository. This is the device database used by PICkitPlus for the PICkit 2 and PICkit 3 program…☆54Updated last year
- 12-Button IR Remote Control☆45Updated 2 years ago
- Simple FIFO buffer for Arduino or other embedded processors☆19Updated 7 years ago
- SMBUS analyzer tool using an Arduino Pro Mini for Smart Batteries that use the Smart Battery System Specification.☆30Updated 6 years ago
- OSC Calibrator and High-Voltage Fuse Resetter for 8-Pin ATtinys☆55Updated 2 years ago
- An AVR Programmer based on USBasp which uses a ZIF-Socket for Programming.☆12Updated 3 years ago
- ATtiny13 Software UART library.☆55Updated last year
- Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based☆50Updated 2 years ago
- GM328A / KKMOON Transitor / Component Tester Firmware☆40Updated 5 years ago
- ☆48Updated 7 years ago
- Minimal bit-bang send serial 38400/115200 baud for 1MHz or 115200/230400 baud for 8 or 16MHz ATtiny clock☆64Updated 10 months ago
- ☆35Updated 4 years ago
- ☆47Updated 7 years ago
- A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico☆58Updated 8 months ago