Crypter / QC3ClientLinks
QuickCharge 3.0 Client for Arduino
☆39Updated 6 years ago
Alternatives and similar repositories for QC3Client
Users that are interested in QC3Client are comparing it to the libraries listed below
Sorting:
- Arduino library for DC-DC converters with UARTs☆43Updated 4 years ago
- ☆55Updated 3 years ago
- ☆42Updated 4 years ago
- A library for the Arduino Due, for using SSD1306 OLED screens, with DMA for high speed.☆40Updated 10 years ago
- ESP32 Pco D4 project with 0.66" Oled Display☆54Updated 7 years ago
- Creates an access point and allows the user to change the name and password remotely☆38Updated 7 years ago
- Smart Battery System for ESP☆75Updated 7 years ago
- Sparklines 📉📈 for ESP8266, ESP32 – Should work with other Arduino-supported controllers☆96Updated 4 years ago
- RemoteDebug library addon: An Simple Software Debugger, based on SerialDebug☆24Updated 6 years ago
- Version of the ESP8266 RGB Matrix that is one single board for the 64x32 display.☆38Updated 5 years ago
- Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd☆58Updated 4 years ago
- Set the voltage of a Quick Charge 2.0 source via the Arduino.☆68Updated 8 years ago
- Reflow Oven Controller with EPS32 and Webapp☆43Updated 6 years ago
- Triggers the shutter of a smartphone cam via bluetooth☆51Updated 6 years ago
- Processing Based GUI for Programming ESP32 modules based on espota.py☆56Updated 5 years ago
- IoTuz driver for ESP32 based LCA 2017 IoTuz board, also can be used as a demo on an espressif WROVER☆30Updated 8 years ago
- ESP32 led panel (64x32) driver with shader and network support☆45Updated 6 years ago
- An object oriented infrared library for the Arduino☆75Updated last year
- ☆70Updated 8 years ago
- Arduino Infrared Remote Library for ESP32☆28Updated 8 years ago
- A Serial User Interface for embedded devices, namely Arduinos.☆50Updated 6 years ago
- ESP32 Frequency Counter using Pulse Counter and Remote Control modules☆71Updated 5 years ago
- ☆35Updated 5 years ago
- Alternative firmware for USB powered soldering iron ZD-20U.☆62Updated 3 years ago
- ☆53Updated 4 years ago
- Notes on using the Chinese "SAMD21-M0-Mini" board☆59Updated last month
- ☆71Updated 7 years ago
- A touch controlled light with 4xWS2812 RGB LEDs and ATtiny 10☆34Updated 7 years ago
- Want to use all SIX GPIO pins on the ATTiny85? Now you can.☆17Updated 7 years ago
- ☆32Updated 5 years ago